• Catalog
  • Technical

Technical

5.11 Sizing Charts

FPS / MS / JOULE conversion

Joule -- FPS ---- MS

0.2 ---- 148 ---- 044,85
0.3 ---- 181 ---- 050,85
0.4 ---- 209 ---- 063,33
0.5 ---- 233 ---- 070,61
0.6 ---- 256 ---- 077,58
0.7 ---- 276 ---- 083,64
0.8 ---- 295 ---- 089,39
0.9 ---- 313 ---- 094,85
1.0 ---- 330 ---- 100,00
1.1 ---- 346 ---- 104,85
1.2 ---- 361 ---- 109,39
1.3 ---- 376 ---- 113,94
1.4 ---- 390 ---- 118,18
1.5 ---- 404 ---- 122,42
1.6 ---- 417 ---- 126,36
1.7 ---- 430 ---- 130,30
1.8 ---- 443 ---- 134,24
1.9 ---- 455 ---- 137,88
2.0 ---- 467 ---- 141,51
2.1 ---- 478 ---- 144,85
2.2 ---- 489 ---- 148,18
2.3 ---- 500 ---- 151,52
2.4 ---- 511 ---- 154,85
2.5 ---- 522 ---- 158,18
2.6 ---- 529 ---- 161,25
2.7 ---- 539 ---- 164.32
2.8 ---- 549 ---- 167,33
2.9 ---- 559 ---- 170,29
3.0 ---- 568 ---- 173,21
3.1 ---- 578 ---- 176,07
3.2 ---- 587 ---- 178,89
3.3 ---- 596 ---- 181,66
3.4 ---- 605 ---- 184,39

Protection standards for spectacles & goggles

 

ANSI Z87.1
ANSI is the American National Standard that covers the basic requirements for personal eye as well as face protection to minimize e.g. accidents from impacts.

EN ISO 12312-1
EN ISO 12312-1:2013 is the European Standard that specifies the special requirements (mechanical, optical, and so on) for sunglasses and sunglare filters for protection against solar radiation for general use etc.

EN 166
The eye protection regarding the professional life is regulated with the norm EN166. It is the standard European norm for the personal eye protection specifications which classified the eye protection in detail.

MIL-PRF-31013
MIL-PRF-31013 is a US military standard for open spectacles and special performance protective eyewear to test its ballistic effectiveness.

MIL-DTL-43511D
MIL-DTL-43511D is a US military standard for closed goggles and special performance protective eyewear to test its ballistic effectiveness.

STANAG 2920/4296
The NATO abbreviation STANAG stands for Standardization Agreement which sets up conditions, terms, technical procedures etc. between the alliance members. This test, which is called V-50, is the adaption of standards for ballistic protection levels / testing of a glass that is shot with a special buckshot. The measured value is the arithmetic mean of the set of measured velocities.